Laptop Keeps Shutting Off - Fix Your Laptop That Keeps Shutting Down

Many a times the laptop keeps shutting off due to system overheating, loose connections of Switched Mode Power Supply (SMPS), problem with the laptop battery and incorrect installation of RAM.

Here are the tricks you can do:

1. Cool down the Laptop
a. Clean the Fans
b. Use Notebook Cooler
c. Change Settings
d. Use a Stand having Built in Fans Designed for Overheating Laptops
e. Use an Independent Power Supply

2. Check SMPS Connections

3. Change the Battery

4. Install RAM Properly

Cool down the Laptop

Laptop overheating has become a common problem these years. The main reason why latest laptops are becoming victim of overheating problem is that the CPU chips and Video chips have become more dense with transistors, all of which generate heat. Overheating problem also occurs if the laptop design is not proper to facilitate cooling.

Clean the Fans

Not only for desktop computers, but also for laptops, fans and help to stabilize the heat.

To clean the vents on the laptop, use an air spray. I do not want to suggest the idea of ​​using a vacuum machine, because it can in some other problems like static electricity and run so on. If you are going to open the case, read the safety instructions in the manual first.

Use a stand with a built-in fan designed to heatLaptops

It will be a good idea if you place your laptop on a stand having extra fans built in designed for such overheating laptops. You can purchase such stands from the laptop manufacturers.

Use an Independent Power Supply

You can use an independent power supply to avoid putting extra pressure on the power system of your laptop.

Check SMPS Connections

SMPS refers to the Switched Mode Power Supply. It's an important element in power system of a laptop. An SMPS is usually employed to efficiently provide a regulated output voltage, typically at a level different from the input voltage.

Ensure that the wires of the SMPS are properly connected. Otherwise, bring it to a laptop repair shop.

Change the Battery

Do the following steps to change the battery of your laptop:

1. Turn off the laptop. Also, disconnect the AC Adapter.
2. Release the Bolts or other fasteners that hold the battery in place.
3. Slide the old battery from the compartment or storage bay.
4. Remove the spare battery box.
5. Send in the slot or the bay.
6. To lock, close the safety latch.
7. Connect the power supply.
8. Insert the battery fully charged.

Installing RAM correctly

RAM refers to Random Access Memory. RAM installed incorrectly can cause problems that may causea problematic laptop keeps shutting off. Here are the steps to remove and install the laptop memory neatly:

1. Turn off the laptop. Remove all power cords, if any.
2. Open the panel for accessing the memory modules.
3. Remove any screws that the panel has.
4. Remove the panel from the laptop and set it aside.
5. Remove the memory module.
6. Align the notch of the memory module with that of the memory slot.
7. Gently insert the Module into the slot at 45 degrees.
8. Once all the pins in the slot, rotate the pot form, to secure the brackets.
9. Insert the memory card cover, screws and power cord.
10. You want to buy your laptop.

Recommendation

Related : HP G60-630US