"If a power problem with the card must be replaced."
This is the site number that I hear from users, the repair took power. Many repair centers and large computer companies (Dell, Gateway, Acer, Toshiba, etc.), it will say that the only way a DC jack fix is to replace the entire motherboard. This is very complicated and simply not true. The DC jack can be safely and successfully removed and installed a new plug.
"Can I remove the plug?"
Thisis a common enough question I asked. It is impossible to do this, but you need the device, such as quality soldering iron (and tips), solder wick or pump, and a steady hand. I've heard people say, "Welding is easy." Welding can be easy, but the seam is usually the hardest part for most people. Even knowing where to look, and how to properly remove the cable without breaking moderation is a must. Many laptops, people trying to repair are notGet the old metal, and broke or ports on the motherboard for things like keyboards and touch pads.
If the DC jack, once repaired it will fail again.
This is true and false. quality DC power jack repair a laptop can last for life. At the same time you can go wrong again. Some laptops have a bad design or design errors that can not be changed and are likely to recur.
Epoxy and epoxy-like compounds should be used to strengthen the network connection.
L ' Problem with epoxy resin, is smothered surrounding circuit fault caused the motherboard. cross-components on a motherboard (voltage regulators, capacitors, filters, power) to heat stress and should not be covered with epoxy products. Sometimes fail DC jack solder and epoxy will do nothing to aggravate this problem, but if not impossible, the DC jack to get safely to fight.
All laptops with Jack problems can be repaired.
If your> Laptop is displaying symptoms or could not feed his grip on the symptom may be a different problem differently. For example, I get requests, giving the laptop battery will not charge. I also find the handset will not work when connected this means that the DC is working, but something else on the motherboard failed. Another example is sometimes when the laptop is out, I removed the motherboard has burned close to the pin voltage. This is a prettycommon event on the Gateway laptop and the replacement of the DC does not help. The entire board would need to be replaced in this case.
Related : HP EliteBook 8740w WH276UT Toshiba Satellite A505-S6012 HP Pavilion DV6-2150US
0 comments:
Post a Comment